Wedge Inserting Machine
Closes wound slots with paper or plastic wedges to hold the coils in place.
MachineBuilt around your stator drawing
After winding, a wedge is pushed into each slot opening to close the slot and keep conductors from moving. The machine forms or feeds the wedge, aligns the stator slot and inserts the wedge without damaging the winding.
Key features
- Formed-paper or pre-cut wedge options
- Guided insertion blade avoids wire damage
- Servo slot indexing
- Wedge length set by recipe
Part processedProcess sequence
The order of operations in one cycle on this machine.
Specifications
| Stator OD | 40–200 mm |
|---|---|
| Stack height | 10–120 mm |
| Slots | 6–48 |
| Control | PLC with 7–10 inch touch HMI, recipe storage |
| Power supply | 415 V AC, 3-phase, 50 Hz |
| Compressed air | 5–6 bar, dry and filtered |
Typical configuration. Every machine is customised to your motor design, and final values are confirmed in our quotation.
Add-ons
- Combined paper + wedge station
- Automatic loading
Get a proposal for this machine
Send your stator or rotor drawing and target output. We reply with a machine configuration, cycle time estimate and price, and can run trial parts on request.
- Free design review of your motor drawing
- Trial winding or testing of your samples
- Installation, training and service across India
More insulation & coil machines
Slot Insulation Paper Inserting Machine
Forms, cuts and inserts slot liner paper into every stator slot in one automatic cycle.
VIEW MACHINE →Coil Lacing Machine
Ties end windings with lacing cord to keep coils compact and secure.
VIEW MACHINE →Lead Wire Stripping and Tinning Machine
Removes enamel from phase leads and tins them for soldering or crimping.
VIEW MACHINE →