BLDC Motor End-of-Line Tester
Runs the finished motor and checks current, speed, power, direction and sensor signals.
Representative imageBuilt around your stator drawing
The end-of-line tester is the last gate before packing. It powers the motor with its own controller or a lab driver, loads it if required, and checks electrical and performance values against the product specification.
Key features
- No-load and load testing
- Current, power, speed and direction measurement
- Hall sensor sequence check
- Hipot and ground continuity
- Test report per serial number
Part processedProcess sequence
The order of operations in one cycle on this machine.
Specifications
| Motor power | Up to 5 kW (model dependent) |
|---|---|
| Supply | Programmable AC/DC source |
| Load | Hysteresis or servo dyno (optional) |
| Control | PLC with 7–10 inch touch HMI, recipe storage |
| Power supply | 415 V AC, 3-phase, 50 Hz |
Typical configuration. Every machine is customised to your motor design, and final values are confirmed in our quotation.
Add-ons
- Speed-torque curve
- Efficiency map
- MES link
Get a proposal for this machine
Send your stator or rotor drawing and target output. We reply with a machine configuration, cycle time estimate and price, and can run trial parts on request.
- Free design review of your motor drawing
- Trial winding or testing of your samples
- Installation, training and service across India
More testing & inspection machines
Stator Winding Tester
Tests resistance, insulation, hipot and surge on wound stators before assembly.
VIEW MACHINE →Back-EMF and Cogging Torque Tester
Drives the motor and measures back-EMF waveform, constant and cogging torque.
VIEW MACHINE →Noise and Vibration Test Booth
Acoustic booth that checks motor noise and vibration against a golden reference.
VIEW MACHINE →