Vision Inspection System
Camera inspection of windings, insulation paper, leads, magnets and labels.
MachineBuilt around your stator drawing
Cameras check what operators miss at speed: paper protruding from a slot, a crossed wire, a missing magnet or a wrong label. The system is added as a stand-alone station or built into any machine on the line.
Key features
- Industrial cameras with matched lighting
- Presence, position and dimension checks
- OCR and DataMatrix reading
- Image storage for NG parts
Part processedProcess sequence
The order of operations in one cycle on this machine.
Specifications
| Cameras | 1–6 per station |
|---|---|
| Resolution | 2–12 MP |
| Control | PLC with 7–10 inch touch HMI, recipe storage |
| Power supply | 415 V AC, 3-phase, 50 Hz |
Typical configuration. Every machine is customised to your motor design, and final values are confirmed in our quotation.
Add-ons
- 3D measurement
- AI-based defect detection
Get a proposal for this machine
Send your stator or rotor drawing and target output. We reply with a machine configuration, cycle time estimate and price, and can run trial parts on request.
- Free design review of your motor drawing
- Trial winding or testing of your samples
- Installation, training and service across India
More testing & inspection machines
Stator Winding Tester
Tests resistance, insulation, hipot and surge on wound stators before assembly.
VIEW MACHINE →BLDC Motor End-of-Line Tester
Runs the finished motor and checks current, speed, power, direction and sensor signals.
VIEW MACHINE →Back-EMF and Cogging Torque Tester
Drives the motor and measures back-EMF waveform, constant and cogging torque.
VIEW MACHINE →