Stator Winding Tester
Tests resistance, insulation, hipot and surge on wound stators before assembly.
Representative imageBuilt around your stator drawing
Catching a winding fault before the stator goes into a motor saves the rotor, housing and labour that would otherwise be scrapped. The tester connects to the phase leads and runs the full sequence in seconds.
Key features
- Phase resistance with temperature compensation
- Insulation resistance and hipot (AC/DC)
- Impulse (surge) test for turn-to-turn faults
- Rotation direction check
- OK / NG with result logging
Part processedProcess sequence
The order of operations in one cycle on this machine.
Specifications
| Resistance | 1 mΩ – 20 kΩ |
|---|---|
| Hipot | Up to 5 kV AC / 6 kV DC |
| Surge | Up to 5 kV |
| Test time | Typically under 15 s |
| Control | PLC with 7–10 inch touch HMI, recipe storage |
| Power supply | 415 V AC, 3-phase, 50 Hz |
Typical configuration. Every machine is customised to your motor design, and final values are confirmed in our quotation.
Add-ons
- Automatic probing
- Barcode traceability
Get a proposal for this machine
Send your stator or rotor drawing and target output. We reply with a machine configuration, cycle time estimate and price, and can run trial parts on request.
- Free design review of your motor drawing
- Trial winding or testing of your samples
- Installation, training and service across India
More testing & inspection machines
BLDC Motor End-of-Line Tester
Runs the finished motor and checks current, speed, power, direction and sensor signals.
VIEW MACHINE →Back-EMF and Cogging Torque Tester
Drives the motor and measures back-EMF waveform, constant and cogging torque.
VIEW MACHINE →Noise and Vibration Test Booth
Acoustic booth that checks motor noise and vibration against a golden reference.
VIEW MACHINE →