BLDC Motor Winding Machines in Coimbatore
Coimbatore builds a large share of India's pumps and motors. As pump, appliance and fan motors move from induction to BLDC, we supply the winding, rotor and testing machines that make the change possible.
Machines for Coimbatore pump and motor manufacturers
Pump and motor makers in Coimbatore already know winding. What changes with BLDC is the stator type, the magnets on the rotor and the testing at the end of the line. Inner-slot stators need needle winding in place of insert winding, rotors need magnet bonding and magnetizing, and every motor needs a running test with its controller.
We start from your stator and rotor drawings and the output you want per shift, and propose the smallest set of machines that reaches it. Many plants begin with one needle winder and a stator tester beside the existing line, then add rotor and end-of-line stations.
- Machines built around your stator and rotor drawings
- Trials on your samples before purchase
- Installation and operator training at your plant
Areas we serve from Coimbatore
- Coimbatore and SIDCO estates
- Tiruppur and Erode
- Hosur and Krishnagiri
- Salem and Madurai
Service visits are arranged from our Chennai and Bengaluru service locations. Our works and head office are at 75A, Sector-35, Gurugram, Haryana.
Call or WhatsApp +91 98100 93680 or write to info@motionworksrobotics.com.
Machines most asked for by Coimbatore motor makers
- Inner Stator Needle Winding Machine: Needle winder for inner-rotor stators with narrow slot openings, for appliance, pump and automotive motors.
- Multi-Station BLDC Stator Winding Machine: Indexing table winder with 2 to 4 spindles that winds one set of stators while the operator loads the next.
- Stator Winding Tester: Tests resistance, insulation, hipot and surge on wound stators before assembly.
- Rotor Magnetizer: Capacitor-discharge magnetizer with pole-matched fixtures for assembled rotors.
- Rotor Dynamic Balancing Machine: Measures unbalance in two planes and guides or automates correction.
- BLDC Motor End-of-Line Tester: Runs the finished motor and checks current, speed, power, direction and sensor signals.
Buying a BLDC motor machine in Coimbatore
Do you supply and install machines in Coimbatore?
Yes. Machines are built and tested at our works in Gurugram, then installed and commissioned at your plant, with training for your operators and maintenance team. Service visits are arranged from our Chennai and Bengaluru service locations.
Can we see the machine working on our own stator first?
Yes. Send sample stators, wire and the winding data. We run a trial and share the cycle time and results before you place the order.
Do you supply one machine or a complete line?
Both. Many makers of pump, appliance and fan motors start with one winding machine and a tester, and add rotor, assembly and end-of-line stations as output grows. We also plan and supply turnkey BLDC motor plants.
What do you need from us for a quotation?
Stator and rotor drawings, wire size and turns, the output you need per shift and the level of automation you want. Use the quote form or send the drawings on WhatsApp.
Tell us about your motor
Share your stator and rotor drawings, target output and budget. Our engineers will propose a machine or line layout with cycle time and price. See all locations we serve.