BLDC Motor Winding Machine Manufacturer Serving Pune
Pune's auto component makers are adding BLDC motors for blowers, pumps, seat and window drives and electric two-wheelers. We supply single machines and complete lines for these motors.
Machines for Pune automotive and EV motor makers
Auxiliary motors for vehicles are small, made in large numbers and checked completely. That calls for multi-spindle winding, press-fit stations with force monitoring and a tester that runs every motor. We size each station to your cycle time and link them when the volume justifies it.
If you are quoting a new motor programme, send us the stator drawing and the yearly volume. We reply with the machine list, cycle times and the floor space needed, which you can use in your own quotation.
- Machines built around your stator and rotor drawings
- Trials on your samples before purchase
- Installation and operator training at your plant
Areas we serve from Pune
- Chakan and Talegaon
- Pimpri-Chinchwad and Bhosari
- Ranjangaon
- Nashik and Chhatrapati Sambhajinagar (Aurangabad)
Pune is one of our service locations. Our works and head office are at 75A, Sector-35, Gurugram, Haryana.
Call or WhatsApp +91 98100 93680 or write to info@motionworksrobotics.com.
Machines most asked for by Pune motor makers
- Inner Stator Needle Winding Machine: Needle winder for inner-rotor stators with narrow slot openings, for appliance, pump and automotive motors.
- Multi-Station BLDC Stator Winding Machine: Indexing table winder with 2 to 4 spindles that winds one set of stators while the operator loads the next.
- Shaft and Bearing Press-Fit Machine: Servo press that fits shafts into rotors and bearings onto shafts with force and position monitoring.
- Rotor Dynamic Balancing Machine: Measures unbalance in two planes and guides or automates correction.
- Back-EMF and Cogging Torque Tester: Drives the motor and measures back-EMF waveform, constant and cogging torque.
- BLDC Motor End-of-Line Tester: Runs the finished motor and checks current, speed, power, direction and sensor signals.
Buying a BLDC motor machine in Pune
Do you supply and install machines in Pune?
Yes. Machines are built and tested at our works in Gurugram, then installed and commissioned at your plant, with training for your operators and maintenance team. Pune is one of our service locations.
Can we see the machine working on our own stator first?
Yes. Send sample stators, wire and the winding data. We run a trial and share the cycle time and results before you place the order.
Do you supply one machine or a complete line?
Both. Many makers of automotive auxiliary and EV motors start with one winding machine and a tester, and add rotor, assembly and end-of-line stations as output grows. We also plan and supply turnkey BLDC motor plants.
What do you need from us for a quotation?
Stator and rotor drawings, wire size and turns, the output you need per shift and the level of automation you want. Use the quote form or send the drawings on WhatsApp.
Tell us about your motor
Share your stator and rotor drawings, target output and budget. Our engineers will propose a machine or line layout with cycle time and price. See all locations we serve.